Windows95 can be setup to treat a modem like a network board, allowing to use the modem for network related actions, like to connect to the Windows system at home or at work (where a Windows95/98 system or a Windows …
If a new network-board is installed and configured, Windows98 installs as default protocol TCP/IP, configured to automatically obtain an IP-address: If you do NOT specify yourself the IP-address or you have a DHCP–server on your network, Windows98 will take longer …
While WindowsNT enforces permissions (you need to have a proper user-right to be able to perform certain activities), Windows95 and Windows98 still operate using the old DOS-PC rules: “The user is knows, what he is doing, and is allowed to …
Installation of Win95/98 System Policy Editor (POLEDIT) Read More »
Before you start, make sure your cabling to done properly ! Thin Ethernet (10base2) Twisted Pair Ethernet (10baseT/UTP) Check/configure plug on Multi-Connector Board on ISA-cards: Network card installation and IRQ/INT Once the new network card has been installed and you …
I am not starting here from scratch, but assume you have installed already your network card.The setup below assumes, that your system is connected on the same network segment as thedomain-server. If you are connected via a router, please view …
Connection a Windows95 system to a NT Domain Server Read More »
I had been using a PCMCIA Modem for years in my old notebook, but when switching to a new model, it took me some time to configure my old modem under Windows 95B (OSR2), so I am documenting it for …
A DOS-based system can connect to a Windows95 or WindowsNT4 Workstation or a Windows NT server using the “Microsoft Network Client 3.0“.To setup a connection, download from the Microsoft FTP-server: ftp.microsoft.com in the directory /bussys/clients/MSCLIENT.the files: “DSK3-1.EXE“ “DSK3-2.EXE” ( these …
Setting up a Printing via a Network follows very much the same procedure as accessing a Disk-resource via the network: 1) Share the Printer On the system, to which the printer is connected, make sure, that in the “Network“-applet, “File …
Most important: when logging in now to your Windows95 system, you MUST use a “User-Name“, which is defined as a NT4 user, and your Windows95 password MUST match now your WindowsNT password ! (or be a Guest !)A user with …
There are 2 accounts build-in to Windows NT: – the “administrator” (which you need to configure/setup the system– the “guest” (which is disabled by default)You can now use this “guest” account to allow network access to shared resources on your …
