You have connected via network or modem to an NT4 or Windows 2000 system (Server or Workstation/Professional), you are not using the connection for a while (having an “idle” connection: no network traffic) and you get automatically disconnected from the …
The DCC host is running:You start then DCC on the “Guest“:It starts to establish the connection, you see on the Host and/or Guestthe message of “Verifying username and password”:but then you get:It is time to check your setup / configuration …
In a Microsoft network, “Access Control” to shared resources is set by default in the Network-applet of the Control-panel to “Share-level access control“: When Sharing now a resource by selecting it with a RIGHT-click to get the content menu: there …
On a fully loaded PC, it is very easy to run out of Interrupts.As a solution, PCI-devices with proper support of the operating system (Windows 95 OSR2.0/2.1 and Windows98) can SHARE interrupts.This is explained in the Microsoft Knowledge base article …
You intend to setup a configuration like:where a TCP/IP connection is required for either connection to a mainframe (which is most often done via TCP/IP) or to other systems on a company internal Wide-Area-Network (WAN).In such configuration, you need to …
Once you know on how to share and map a drive on a local Network and on how to connect to the Internet, you can also share and map via the Internet. On the system making the disk available: “Sharing”: …
I am using the following network to explain the setup requirements of Routing (assuming that you have knowledge of TCP/IP setup and on setting up systems with MULTIPLE network adapters): Some of these systems are/can beWindows95/98, some are/MUST be NT4 …
